Rislone Testimonials

Thank You so much! I have this skid loader that is equipment I use in my orchard and property. Seems that through the years of using Either for starting purposes is had taken a toll on the engine cylinder walls and rings. I was losing compression, burning blue smoke, fouling of the plugs. I just couldn't get enough power to run the boom up and down and do the work I needed done. I stopped by our neighborhood Auto Zone and purchased a can of Compression restore for I think was $9.00. I couldn't wait to try it.

I drained all the oil and dumped about 3/4 of the can of Rislone in the Onan engine (2-piston). I ran this for about 10 minutes and was amazed. I have never had this much GOOD happen all at once. I drove out behind the barn and picked up a fiberglass tank that weighed about 900 to 1000 lbs up like it wasen't even there. The skid loader ran great all the rest of the evening and still running great.. and guess what (no-smoke). Rislone you saved my day and thank you so very much. ((( I am 57 years old ))) and very thankful for finding your product.

“HI! I wanted you to know that I am in the middle of restoring my 1990 Mitsubishi Eclipse, including an engine rebuild. I have been using Rislone at oil change time for a couple of years, and was wondering if it would have long term benefits. Well, I was quite surprised at the lack of varnish on the inside of the engine! This engine is a 4 cylinder with almost 150,000 miles on it and it looks great on the inside! I’m SURE your product has much to do with this! I will continue to use your product in every vehicle I own.”
J. E. – Port Charles, FL

“After accumulating close to 80,000 miles on the present rebuilt V-8, it started to act its age, continuing to foul several plugs and running sluggish. I added Rislone to the engine and always added 1 quart of Rislone each oil change. That was close to 50,000 miles ago and the engine has simply been given a second life! I will remain a faithful customer and continue to brag about your product.”
K. S. – Phoenix, AZ

“a friend of mine recommended your product when he heard my engine lifters making some noise. i own a 1996 pontiac sunfire with 125,000 miles. i change my oil today using your product (the one quart product and three quarts of halvoline 10w – 30. i checked the fluid levels and took the car for a short ride around the block, and parked it in the driveway still running. now for the fun part. i could not believe that my car sounded like a brand new model!!! and power, it was just a short ride, but i could tell the difference. thanks to my friend for the word of mouth advice to your product. i could have spent more money and got less from other products (slick – 50, dura- lube, etc). you need to advertise more to the word out about such a great product. i know i will recommend it.
H. W. – Beloit, WI

“Hi, Just wanted to tell you that I used a quart of Rislone this weekend and it worked magic. I had left my 1989 300se Mercedes sitting for about two weeks. When I started it up one of the lifters was clacking away. Since it was time to change the oil anyway I added a quart of Rislone and after driving about 10 miles the lifter quieted right down. No noise now. This stuff works!
Herb – New Bern, NC

“I’m here to tell you that my Ford-f150 has 184000 miles. I have changed my oil every 3000 miles and added 1 qt. of your Rislone each time. No problems, no clatter, nothing but satisfaction! I intend to see just how far and how long my engine holds out. I will get back to you in another 100000 miles.”
J. W. – via email

“I have been using (Rislone) engine treatment since I was 18 with my first car a 75 ford maverick, now I have a 1989 chevy caprice wagon with the 307 olds motor in it, with 196,000 miles on it and it still runs like a top!...Keep up the good work people!”
T. S – via email

“I have used Rislone Engine Treatment with every oil change in my 1997 Honda Civic since it was new, along with Mobil 1 synthetic oil and Mobil 1 oil filters. The car now has 151,000 miles on it, and the engine oil stays so clean that the mechanic changing the oil at 3,000 miles has stated more than once “are you sure you want to change this oil, its as clean as new”. And the engine runs great and has never had any mechanical problems . I just returned from a 5200 mile round trip dive out west without changing the oil, and the engine used less than half a quart of oil during that 5200 miles…maybe just ¼ quart used. In my normal 3,000 miles between oil changes the engine uses no oil. “
T. H. – via email

“My Audi A-6 wagon now has 252,450 miles and I’m convinced you’re the reason why. I have used your product for about 20 years now. I have the oil changed every 3000 miles and use your product in between oil changes. “
F. S. – via email

“I own a 95 plymouth voyager about 2 weeks after I bought the van my lifters started to tap with only 82,000 miles on it. I always heard the Lucas Oil Treatment was good, so I tried it, nothing still tapping and my wife drove this van for over a year with it tapping, very badly. Well it was time for a long road trip, take in consideration I live in arkansas, and had to drive to Maryland, over a thousand miles away, and was a little nervous. So I bought some RISLONE, that a old friend told me about, that he used in an old bronco of his. Let me tell you what by the time I got to Maryland the tapping stopped, oh thank you, what a relief I have.”
D. L. – Arkansas

“I just want to let you know that the Rislone engine treatment works wonders!! I have a 1987 mustang gt, I pulled up to work today and hear this sound which to me sounded like someone hitting my engine with a hammer, that’s how bad it was ticking. I asked my grandpa what he thought I should do and he told me to just get a bottle of this stuff that he used “back in 74” called Rislone, an old mechanic told him about it when he had a similar problem. Worth a drive to the auto parts store and see. Sure enough it was there, a bright yellow bottle. So I drove my moms car to my work where my car was, and poured in a bottle. I sat in my car and noticed my oil pressure was higher than before. I waited a bit longer and the clanking became ticking, and then became NOTHING!!! I was amazed. ..i just want to thank you all at Rislone for not only making this stuff but for saving me from spending money that was anything over the price I paid for the blue stuff in the yellow bottle. Once again Rislone works wonders!!”
J. V. – via email

“Gentleman and Ladies, In 1988 I found a ’51 Packard for sale at a low price. The present owner could not make it run right. It took me two days to figure out the reason for the hard starting and backfiring – a bad condenser. The new one cost $.80 and then it ran great. As soon as I went out on the highway I saw the blue haze behind me, uh-oh, an oil burner. As soon as I returned I went to Pep Boys and bought a can of Rislone, added it and gradually the oil burning went away completely. Years later when the new owner was telling me about his great trip to Florida, I thought about the blue smoke. Who would ever think such an engine could be repairs so easily. Since then I have used Rislone in very old car I rejuvenate. When an engine has been sitting for a long time the Rislone makes all the difference. If the rings stick and the car is driven that way, soon a rebuild will be necessary. “
H. J. – via email

“I’ve been driving a ’94 Mazda Miata for about five years, storing it in the winter. Always had a bit of a lifter noise, especially after storage. Planned to sell it this spring and put in the local paper. Started it after the winter – the knock was worse than ever. I called a local mechanic. He said it may be a significant problem but to try one thing first – get a bottle of Rislone from NAPA, put it in the oil and drive for a bit. He insisted accept no substitutes. I did and guess what – the knock went completely away. The engine purred like new. I was overjoyed. What a great product.”
P. R. – Chagrin Falls, OH

“I am writing to thank you for your product. I drive a 93 Subaru Legacy station wagon. Two years ago it developed an engine noise that one mechanic said was sticking lifter. He said I should plan to get a new car in about 10,000 miles. I drained the oil and tried Rislone Engine Treatment with the new oil, after picking it at random from the variety of engine treatment products available at the auto parts store. In about a week, the noise disappeared. I continued to use Rislone for several oil changes, but stopped when it seemed like the engine was doing fine. Recently, 20,000 miles after the first episode, the lifter noise returned. Again I drained the oil and added a quart of Rislone to the new oil. This time it took four days for the noise to go away. Hopefully the noise will not return soon. Thank you for the product. I know my car won’t last forever but I’m confident Rislone Engine Treatment has helped it last a little longer.”
A. L. – Baltimore, MD

“I am so impressed with this product I have used it in my 92 Ford Explorer since I bought it in 1994 that I felt it would be ideal for my little diesel. By the way, my Explorer passed 455,000 kilometers the other day, does not burn one drop of oil, still has 155-160 compression (New is about 180), runs very smoothly, and has power to burn. I have a spare engine sitting in my garage gathering dust. I have never done anything to this engine, except service it regularly, and use the Rislone oil treatment.”
J. W. – Vancouver Island, BC, Canada

“Well, I must admit I didn’t believe it until I tried it. I have a 1986 Cadillac Seville with a cylinder which was not firing. I put your Rislone into my oil and about two weeks later while on I-75 the engine acted weird for a few minutes and low and behold the bad cylinder was firing! The total engine performance was improved magnificently and is almost like new. …the engine has 165,000 miles on it and is running almost perfectly! If you get any doubters just let me know, I believe!”
J. S. – Detroit, Michigan

“I want to commend you on your engine treatment product. I purchased a 1987 motor home last year and was plagued with a collapsed lifter at high rpm. After trying several of your competitors products I was left with the prospect of rebuilding the engine at a cost of $4000. A friend, who happens to be a mechanic, suggested that I try your product before committing to the expensive repairs. I wasn’t hopeful yet I still gave it a try. Well I have to admit that after 30 miles of highway traveling at 60 mph, the engine seemed to have more power. I found a steep uphill grade to try and kicked town into high rpm. To my astonishment there was no return of the familiar rap of the knocking valve lifter. I tried everything to get the lifter to collapse, but all was to no avail. This engine behaves as it should and has made a believer out of me.”
B. H. – via email

“I have been a Rislone user for the past 15 years. My Father has always used it and my grandfather before him. With every oil change I use a quart of Rislone. I have a 94 Ford F150 with 140,000 miles and have used this additive every oil change since I bought the truck. Recently I had to replace the oil pan gasket and when I dropped the pan I was impressed to see that there was very little build-up of residue in the crank case. This has made a firm believer out of me and I will continue to always add Rislone at my oil changes.”
W. U. – via email

“I have been buying Rislone for all of my cars since I was 17. When I was 17 a good friend of mine told me about Rislone and soon I became a fan and user. I had a 1972 Mercury Comet and a 250 inline 6. When I bought the car it ran so bad that I had to do something to even make it run down the freeway. When I heard about Rislone I used it right away with the first oil change. Than after that at least once a month with the oil additive and than always using one Rislone in place of one thing of oil in every oil change. One year later I took the whole engine apart and I had mechanics gasp at the fact that my engine was so clean that you really could find no excess dirt on the walls of the engine.”
K. T. – via email

“Just letting you know that I am amazed at the results from adding a quart of Rislone at my last oil change. I have a 1997 Chevy Truck 5.7 L Engine with 86000 miles. It stopped all of the sticking valve clatter and the engine seems to run much smoother. My dad suggested using Rislone as he had done over the last 50 years with excellent results. Thank you Rislone.”
C. P. – via email

“I have heard of Rislone for many years but never tried it. I have a 1997 Plymouth Neon that I bought in 1998. At times it appears that a valve lifter would stick and the “service engine soon” light would come on. My dealer could resolve the problem but the last time it did this, about two weeks ago, I bought a bottle of Rislone at my local Safeway grocery store. The very next day I could notice more engine power from the 150 hp DOHC engine. Also, that car engine would always “ping” terrible on regular unleaded gas, still “ping” on mid-grade fuel and even get some “pinging” on premium grade fuel. I tried a different brand of gas and it still “pinged”. Well, I refueled last week with “mid grade” gas…NO ping, so then I added one, tank of “regular unleaded” and been driving it this week. I have not noticed any engine “ping” on regular 87 octane this week. I’m believing the Rislone is the reason for this. …Thanks so much for your product.”
L. P. – Everett, WA

“I just thought that I would drop you a line and tell you that after forty years of using your product…I like it…it works…as advertised. I have, consistently, used Rislone Engine Treatment in every car that I have owned over the years, and besides the assured optimum performance of my cars, whenever I tear an engine down, it is usually clean as a whistle inside with minimal wear. And like the Chuck Berry song, I knew it was going my motor good.”
W. W. – Lakewood, CA

“I have used your product for years and even compared it to Marvel Mystery Oil. It even works better than this outstanding product. It will eliminate “noises” it won’t. “
W. E. – Drexel Hill, PA

“I have a 1995 VW Jetta with about 185000 miles on it…I put Ring Seal in the engine, and WOW! I noticed an almost immediate difference. I am definitely going to use it again, and will look for more of your products. Recommend to friends?...YOU BET”
J. R. – via email

“You make a product called Ring Seal manufactured under the Rislone label. I am writing to ask you to never, never ,whatever you do never stop making Ring Seal. That chemical solution is one of the most remarkable products to be put into an engine. I have a 1985 Ford Crown Vic with 233,635 miles on it. …It runs so much smoother and quieter. I recommend your product to all my friends and they love it too. Don’t ever stop making it. It is a wonderful product.”
R. P. – Dayton, OH

“I tried out Rislone Ring Seal for the first time this morning. I’m absolutely amazed at the difference in my car! I could hear the difference in the purring of the engine right away. The engine runs more smoothly and I’m putting out fewer emissions. There were a bewildering array of similar-looking products on the shelf at the store, so I asked a salesperson what he recommended. He said that, although he didn’t have any experience with this himself, most of the mechanics who come in the store go with Rislone. I went with that as a recommendation and I’m quite happy I did. Thanks for a great product.”
M. W. – Berkeley, CA

Testimonials on Rislone Products

Bar's Products is always happy to hear from our customers regarding their experience with our products. Feel free to visit ouR contact page to send us your own testimonial!